PVA is a water-soluble material that is often used as a support material with no need of adding any chemical and speicial treating. Leave the part in a warm water bath dissolve faster. After dissolution, there is no residue on the model surface with smoothy effect; it can be worked with PLA, TPU, PA(nylon) and other consumables materials to print extremely complex shapes or support materials with a partially closed cavity model. It’s also a good choice to work for multi-nozzle printers.
PVA is a water-soluble material that is often used as a support material with no need of adding any chemical and speicial treating. Leave the part in a warm water bath dissolve faster. After dissolution, there is no residue on the model surface with smoothy effect; it can be worked with
PLA, TPU, PA(nylon) and other consumables materials to print extremely complex shapes or support materials with a partially closed cavity model. It’s also a good choice to work for multi-nozzle printers.
Sellingpoint
Water soluble.
Support material.
PVA filament, Natural, 0.5kg/roll
3D Printing Filament
PVA
Printing Temperature
180-230°C (Recommend 190°C)
Base Plate Temperature
45-60°C
Printing Speed
45-50mm/s
Density
1.25g/cm3
Fan
100%
Melt Index
-
Tensile Strength
22Mpa
Elongation at break
360%
Bending strength
- MPa
Flexural Modulus
- MPa
Lzod notched impact strength
- KJ/m2
Heat distortion temperature
- °C(0.45MPa)
Filament Length (1.75mm)
-